この専門家をプロジェクトに採用したいですか？ 見積もりを依頼 無料で。
プロフィール詳細
Dr. Ebenezer Jacob Dhas D.に依頼
India
Mechanical Engineering Academic & Publication Consultant | Manuscript Peer Review, Grant Writing, and Technical Audits
プロフィール概要
専門分野
サービス
Writing
Technical Writing,
Creative Writing,
General Proofreading & Editing
Research
Feasibility Study,
Gap Analysis,
Scientific and Technical Research,
Systematic Literature Review
Consulting
Business Strategy Consulting,
Scientific and Technical Consulting,
Manufacturing Consulting
Data & AI
Statistical Analysis,
Data Visualization
Product Development
Formulation,
Product Evaluation,
Product Validation,
Reverse Engineering
職務経験
Assistant Professor
Karunya Institute of Technology and sciences
9月 2016 - 現在 
Assistant Professor
Kumaraguru College of Technology
7月 2012 - 6月 2016
Junior lecturer
Government College of Technology
5月 2010 - 5月 2012
学歴
M.E (Engineering Design) (Mechanical Engineering )
Government College of Technology
7月 2010 - 5月 2012
Bachelor of Engineering (Production Engineering)
Government College of Technology
7月 2006 - 5月 2010
Lisieux Matriculation Higher Secondary school
5月 1992 - 5月 2006
認定資格
-
People Skills and Soft Skills Assessment
IBM
https://www.coursera.org/account/accomplishments/records/6V7U01UX8TB51月 2026 - 現在
出版物
JOURNAL ARTICLE
S Kabireal Stephen, S Mohanasundaram, SJ Vijay, DS Ebenezer Jacob Dhas, Rajakumar S Rai (2026). High-temperature macro-molecular polymer composites for automotive applications: A critical review of sustainable matrices and performance . Journal of Thermoplastic Composite Materials.
R. Raja, Sabitha Jannet, D. S. Ebenezer Jacob Dhas, K. Sumanth Ratna (2026). Microstructure and Mechanical Properties of Copper Metal Matrix Composites Reinforced with Hybrid Ceramic and Fuse Holder Scrap . Journal of Materials Engineering and Performance.
D S Ebenezer Jacob Dhas, L Joseph Francis, R Raja, Sabitha Jannet, S Roseline (2025). Corrosion studies on Al 7075/boron carbide/titanium/graphite hybrid composites for heat exchangers . Engineering Research Express.
A. W. Devaraj, D. S. E. J. Dhas, S. J. Vijay, K. L. D. Wins, R. Raja, R. S. Rai, H. Hyjan, S. J. Joshua, S. Jerin (2025). Advanced solid‐state processing techniques for enhanced strengthening of lightweight materials: the evolution of high entropy alloy composites . Materialwissenschaft und Werkstofftechnik.
D. P. Selvaraj, D. S. E. J. Dhas, P. George (2025). Effect of machining parameters on the machinability of 15‐5 precipitation hardened stainless steel during dry turning . Materialwissenschaft und Werkstofftechnik.
Selvaraj, D.P., Dhas, D.S.E.J., George, P.(2025). Effect of machining parameters on the machinability of 15-5 precipitation hardened stainless steel during dry turning,Einfluss der Bearbeitungsparameter auf die Bearbeitbarkeit von ausscheidungsgehärtetem Edelstahl 15-5 beim Trockendrehen . Materialwissenschaft Und Werkstofftechnik. 56. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 281-289.
George, P., Dev Wins, K.L., Jacob Dhas, D.S.E., Beatrice, B.A., George, P.(2025). A grey relational-Taguchi analysis on high-speed milling of duplex and super duplex stainless steels used in chemical tankers . International Journal on Interactive Design and Manufacturing. 19. (7). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 5153-5170.
Francis, L.J., Raja, R., Dhas, D.S.E.J., Jannet, S., Roseline, S.(2025). Corrosion studies on Al 7075/boron carbide/titanium/graphite hybrid composites for heat exchangers . Engineering Research Express. 7. (3).
D S Ebenezer Jacob Dhas, Pramod George, Philip Selvaraj D, Pradeep George (2024). Effect of machining parameters on average surface roughness during computer numerical controlled dry milling of high strength AISI 420 martensitic stainless steel . Engineering Research Express.
D. S. E. J. Dhas, K. L. D. Wins, B. A. Beatrice, D. S. Thomas, S. Correya (2024). Effect of tungsten carbide and titanium dioxide particles on the properties of aluminium alloy 5052 hybrid composites . Materialwissenschaft und Werkstofftechnik.
G Lawrance, P Sam Paul, DS Shylu, DS Ebenezer Jacob Dhas, C Dineshkumar, PD Jeyakumar, Solomon Jenoris Muthiya, Netsanet Ayele Getachew (2024). Effect of metallic substrate and rubber elastic materials over passive constrained layer damping on tool vibration during boring process . Journal of Low Frequency Noise, Vibration and Active Control.
D S Ebenezer Jacob Dhas, D Joslin Vijaya, D S Robinson Smart, Leo Dev Wins K (2024). Synergistic effect of niobium carbide and titanium nanoparticles on the mechanical and microstructural properties of Al-Zn-Mg-Cu alloy hybrid composites . Engineering Research Express.
D S Ebenezer Jacob Dhas, Vinoj Mathew, D S Robinson Smart, K Leo Dev Wins (2024). Effect of temperature, geometric parameters, and surface conditions on fluid mixing in a vertical port static mixer . Engineering Research Express.
Vijaya, D.J., Robinson Smart, D.S., Leo Dev Wins, K., Dhas, D.S.E.J.(2024). Synergistic effect of niobium carbide and titanium nanoparticles on the mechanical and microstructural properties of Al-Zn-Mg-Cu alloy hybrid composites . Engineering Research Express. 6. (2).
Mathew, V., Robinson Smart, D.S., Wins, K.L.D., Dhas, D.S.E.J.(2024). Effect of temperature, geometric parameters, and surface conditions on fluid mixing in a vertical port static mixer . Engineering Research Express. 6. (1).
Dhas, D.S.E.J., Wins, K.L.D., Beatrice, B.A., Thomas, D.S., Correya, S.(2024). Effect of tungsten carbide and titanium dioxide particles on the properties of aluminium alloy 5052 hybrid composites,Einfluss von Wolframkarbid- und Titandioxidpartikeln auf die Eigenschaften von Hybridverbundwerkstoffen aus der Aluminiumlegierung AW-5052 . Materialwissenschaft Und Werkstofftechnik. 55. (9). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1276-1282.
Lawrance, G., Paul, P.S., Shylu, D.S., Ebenezer Jacob Dhas, D.S., Dineshkumar, C., Jeyakumar, P.D., Muthiya, S.J., Getachew, N.A.(2024). Effect of metallic substrate and rubber elastic materials over passive constrained layer damping on tool vibration during boring process . Journal of Low Frequency Noise Vibration and Active Control. 43. (3). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1139-1157.
George, P., Selvaraj D, P., Dhas, D.S.E.J., George, P.(2024). Effect of machining parameters on average surface roughness during computer numerical controlled dry milling of high strength AISI 420 martensitic stainless steel . Engineering Research Express. 6. (3).
D.S.E.J. Dhas, K.L.D. Wins, B.A. Beatrice (2023). Empirical modeling of profile roughness parameters during end milling of aluminium alloy 5052/tungsten carbide/graphite hybrid composite . Materialwissenschaft und Werkstofftechnik.
D. S. E. J. Dhas, R. Raja, S. Jannet, K. L. D. Wins, J. M. Thomas, S. R. Kandavalli (2023). Effect of carbide ceramics and coke on the properties of dispersion strengthened aluminium‐silicon7‐magnesium hybrid composites . Materialwissenschaft und Werkstofftechnik.
Dhas, D.S.E.J., Wins, K.L.D., Beatrice, B.A.(2023). Empirical modeling of profile roughness parameters during end milling of aluminium alloy 5052/tungsten carbide/graphite hybrid composite,Empirische Modellierung von Profilrauheitsparametern beim Schaftfräsen von Aluminiumlegierung 5052/Wolframkarbid/Graphit-Verbundwerkstoff . Materialwissenschaft Und Werkstofftechnik. 54. (12). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1537-1541.
Dhas, D.S.E.J., Raja, R., Jannet, S., Wins, K.L.D., Thomas, J.M., Kandavalli, S.R.(2023). Effect of carbide ceramics and coke on the properties of dispersion strengthened aluminium-silicon7-magnesium hybrid composites,Einfluss von Karbidkeramik und Koks auf die Eigenschaften von dispersionsverstärkten Aluminium-Silizium7-Magnesium-Hybrid-Verbundwerkstoffen . Materialwissenschaft Und Werkstofftechnik. 54. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 147-157.
D S Ebenezer Jacob Dhas, R Raja, Sabitha Jannet, Joel Aby (2022). Study of the mechanical, wear and corrosion behaviour of silicon nitride nanoparticles reinforced copper surface composite through friction stir processing . Engineering Research Express.
Dr. D.S. Ebenezer Jacob Dhas(2022). Effect of Machining Parameters on Cutting Performance of DSS 2205 and SDSS 2507 Materials During Milling Operation . Journal of Advanced Manufacturing Systems. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--16. World Scientific Pub Co Pte Ltd
Dr. D.S. Ebenezer Jacob Dhas(2022). Influence of Cutting Parameters on Machinability of DSS 2205 and SDSS 2507 Materials During Milling . International Journal of Manufacturing, Materials, and Mechanical Engineering. 12. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1--19. {IGI} Global
George, P., Leo Dev Wins, K., Jacob Dhas, D.S.E., George, P., Beatrice, B.A.(2022). Influence of Cutting Parameters on Machinability of DSS 2205 and SDSS 2507 Materials During Milling . International Journal of Manufacturing Materials and Mechanical Engineering. 12. (1).
Raja, R., Jannet, S., Aby, J., Ebenezer Jacob Dhas, D.S.(2022). Study of the mechanical, wear and corrosion behaviour of silicon nitride nanoparticles reinforced copper surface composite through friction stir processing . Engineering Research Express. 4. (3).
George, P., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., Anuja Beatrice, B.(2022). Effect of Machining Parameters on Cutting Performance of DSS 2205 and SDSS 2507 Materials during Milling Operation . Journal of Advanced Manufacturing Systems. 21. (4). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 711-726.
George, Pradeep, Wins, K. Leo Dev, Dhas, D. S. Ebenezer Jacob, Beatrice, B. Anuja (2022). Effect of Machining Parameters on Cutting Performance of DSS 2205 and SDSS 2507 Materials During Milling Operation . Journal of Advanced Manufacturing Systems.
Dr. D.S. Ebenezer Jacob Dhas(2021). Effect of sphere configurated particle damper on tribological properties during boring of hardened steel . International Journal of Modern Manufacturing Technologies. 13. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 21--33. Asociatia Profesionala in Tehnologii Moderne de Fabricatie
K. Ragupathy, C. Velmurugan, D. S. Ebenezer Jacob Dhas, N. Senthilkumar, K. Leo Dev Wins(2021). Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM) . Arabian Journal for Science and Engineering. Springer Science and Business Media {LLC}
V Manivelmuralidaran and K Senthilkumar and Jacob Ebby and T Ram Prabhu(2021). Optimisation of parameters influencing cold crack resistance of SAE 950A steel . Sādhanā. 46. (3). Springer Science and Business Media {LLC}
S. Ramani, K. Leo Dev Wins, Jayakrishnan Nampoothiri, K. R. Ravi, D. S. Ebenezer Jacob Dhas(2021). Effect of post-reaction ultrasonic treatment on synthesis, microstructural evolution and mechanical behaviour of Al 4043/TiB2 in situ nanocomposites . Arabian Journal for Science and Engineering. 46. (8). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 7521--7531. Springer Science and Business Media {LLC}
S. Ramani and K. Leo Dev Wins and D.S. Ebenezer Jacob Dhas and B. Anuja Beatrice(2021). Influence of B4C and TiB2 nanoparticles in tungsten inert gas weldment: The development of nanocomposite filler re-melt behaviour for joint strength enhancement . Materials Today: Proceedings. Elsevier {BV}
Pradeep George and K. Leo Dev Wins and D.S. Ebenezer Jacob Dhas and Pramod George and B. Anuja Beatrice(2021). Effect of machining parameters on cutting force during dry milling of 2205 DSS and 2507 SDSS materials . Materials Today: Proceedings. Elsevier {BV}
Pradeep George and K. Leo Dev Wins and D.S. Ebenezer Jacob Dhas and Pramod George and Anuja Beatrice B(2021). Machinability, weldability and surface treatment studies of SDSS 2507 material-A review . Materials Today: Proceedings. Elsevier {BV}
George, Pradeep, Wins, K. Leo Dev, Dhas, D. S. Ebenezer Jacob, George, Pramod, Beatrice, B. Anuja (2021). Machinability, weldability and surface treatment studies of SDSS 2507 material-A review . Materials Today: Proceedings.
Leo Dev Wins, K., Anuja Beatrice, B., Ebenezer Jacob Dhas, D.S., Anita Sofia, V.S., Leo Dev Wins, K., Anuja Beatrice, B., Ebenezer Jacob Dhas, D.S., Anita Sofia, V.S. (2021). Artificial Neural Network and Genetic Algorithm-Based Models for Predicting Cutting Force in Turning of Hardened H13 Steel . Trends in Manufacturing and Engineering Management. Select Proceedings of ICMechD. Lecture Notes in Mechanical Engineering (LNME).
Ramani, S., Wins, K.L.D., Nampoothiri, J., Ravi, K.R., Dhas, D.S.E.J.(2021). Effect of post-reaction ultrasonic treatment on synthesis, microstructural evolution and mechanical behaviour of Al 4043/TiB2 in situ nanocomposites . Arabian Journal for Science and Engineering. 46. (8). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 7521-7531.
S. Ramani, K. Leo Dev Wins, D.S. Ebenezer Jacob Dhas, B. Anuja Beatrice (2021). Influence of B4C and TiB2 nanoparticles in tungsten inert gas weldment: The development of nanocomposite filler re-melt behaviour for joint strength enhancement . Materials Today: Proceedings.
Ramani, S., Wins, K. Leo Dev, Nampoothiri, Jayakrishnan, Ravi, K. R., Dhas, D. S. Ebenezer Jacob (2021). Effect of post-reaction ultrasonic treatment on synthesis, microstructural evolution and mechanical behaviour of Al 4043/TiB<sub>2</sub> in situ nanocomposites . Arabian Journal for Science and Engineering.
Ragupathy, K., Velmurugan, C., Ebenezer Jacob Dhas, D.S., Senthilkumar, N., Leo Dev Wins, K.(2021). Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM) . Arabian Journal for Science and Engineering. 46. (12). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 12045-12063.
Ragupathy, K., Velmurugan, C., Ebenezer Jacob Dhas, D. S., Senthilkumar, N., Leo Dev Wins, K. (2021). Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM) . Arabian Journal for Science and Engineering.
Pradeep George, K. Leo Dev Wins, D.S. Ebenezer Jacob Dhas, Pramod George, B. Anuja Beatrice, Pradeep George, K. Leo Dev Wins, D.S. Ebenezer Jacob Dhas, Pramod George, B. Anuja Beatrice (2021). Effect of machining parameters on cutting force during dry milling of 2205 DSS and 2507 SDSS materials . Materials Today: Proceedings.
Manivelmuralidaran, V., Senthilkumar, K., Ebby, J., Prabhu, T.R.(2021). Optimisation of parameters influencing cold crack resistance of SAE 950A steel . Sadhana Academy Proceedings in Engineering Sciences. 46. (3).
Manivelmuralidaran, V, Senthilkumar, K., Ebby, Jacob, Prabhu, T. Ram (2021). Optimisation of parameters influencing cold crack resistance of SAE 950A steel . Sādhanā.
Gunaraj, L., Paul, S., Dhas, E.J.(2021). Effect of sphere configurated particle damper on tribological properties during boring of hardened steel . International Journal of Modern Manufacturing Technologies. 13. (2). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 21-33.
Ebenezer Jacob Dhas, Lawrance Gunaraj, Department of Mechanical Engineering, Karunya Institute of Technology Sciences, Sam Paul, Department of Mechanical Engineering, Karunya Institute of Technology Sciences, Department of Mechanical Engineering, Karunya Institute of Technology Sciences (2021). Effect of sphere configurated particle damper on tribological properties during boring of hardened steel . International Journal of Modern Manufacturing Technologies.
(2020). Effect of nano cupric oxide coating on the forced convection performance of a mixed-mode flat plate solar dryer . Renewable Energy.
Sivakumar, S., Velmurugan, C., Dhas, D.S.E.J., Solomon, A.B., Dev Wins, K.L.(2020). Effect of nano cupric oxide coating on the forced convection performance of a mixed-mode flat plate solar dryer . Renewable Energy. 155. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1165-1172.
Sivakumar, S., Velmurugan, C., Dhas, D. S. Ebenezer Jacob, Solomon, A. Brusly, Wins, K. Leo Dev (2020). Effect of nano cupric oxide coating on the forced convection performance of a mixed-mode flat plate solar dryer . Renewable Energy.
Prediction of Surface Roughness using Sensor Fusion Regression Model @article{2019, doi = {10.35940/ijitee.l1134.10812s19}, url = {https://doi.org/10.35940%2Fijitee.l1134.10812s19}, year = 2019, month = {dec}, publisher = {Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - {BEIESP}}, volume = {8}, number = {12S}, pages = {538--540}, title = {Prediction of Surface Roughness using Sensor Fusion Regression Model}, journal = {International Journal of Innovative Technology and Exploring Engineering}} . International Journal of Innovative Technology and Exploring Engineering.
Ebenezer Jacob Dhas D S, S Rajesh, C Velmurugan, Samuel Ratna Kumar P S(2019). Studies on the tribological behaviour of exsitu-synthesized AlMg1SiCu/titanium carbide/molybdenum disulfide hybrid composites . Materials Research Express. {IOP} Publishing
D S Ebenezer Jacob Dhas, G Prabhu Rubesh, A Ramesh, Titus Thankachan(2019). Characterization of Al–Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and tribological behaviour . Materials Research Express. {IOP} Publishing
Rajesh, S., Velmurugan, C., Ebenezer Jacob Dhas, D.S., Ratna Kumar P S, S.(2019). Studies on the tribological behaviour of exsitu-synthesized AlMg1SiCu/titanium carbide/molybdenum disulfide hybrid composites . Materials Research Express. 6. (12).
(2019). Prediction of Surface Roughness using Sensor Fusion Regression Model . International Journal of Innovative Technology and Exploring Engineering.
Jacob Dhas, D.S.E., Velmurugan, C., Wins, K.L.D., BoopathiRaja, K.P.(2019). Effect of tungsten carbide, silicon carbide and graphite particulates on the mechanical and microstructural characteristics of AA 5052 hybrid composites . Ceramics International. 45. (1). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 614-621.
Prabhu Rubesh, G., Ramesh, A., Ebenezer Jacob Dhas, D.S., Thankachan, T.(2019). Characterization of Al-Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and tribological behaviour . Materials Research Express. 6. (7).
D. S. Ebenezer Jacob Dhas, C. Velmurugan, K. Leo Dev Wins(2018). Investigations on the Effect of Tungsten Carbide and Graphite Reinforcements during Spark Erosion Machining of Aluminium Alloy (AA 5052) Hybrid Composite . Silicon. 10. (6). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 2769--2781. Springer Science and Business Media {LLC}
Ebenezer Jacob Dhas, D.S., Velmurugan, C.(2018). Mathematical modeling of the corrosion response of aluminium 5052/tungsten carbide/graphite hybrid composite,Mathematische Modellierung der Korrosionsreaktion von Aluminium 5052/Wolframkarbid/Graphit-Hybrid-Verbundwerkstoff . Materialwissenschaft und Werkstofftechnik. 49. (11). Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1335-1345.
Dhas, D. S. Ebenezer Jacob, Velmurugan, C. (2018). Mathematical modeling of the corrosion response of aluminium 5052/tungsten carbide/graphite hybrid composite . Materialwissenschaft und Werkstofftechnik.
Dhas, D.S.E.J., Velmurugan, C., Wins, K.L.D.(2018). Investigations on the Effect of Tungsten Carbide and Graphite Reinforcements during Spark Erosion Machining of Aluminium Alloy (AA 5052) Hybrid Composite . Silicon. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 1-13.
K. Ragupathy and C. Velmurugan and S. Rajesh and D.S. Ebenezer Jacob Dhas(2015). Mathematical Model Development to Predict Wear Rate of Al6061/TiC<sub>p</sub> Composites under Lubricant . Applied Mechanics and Materials. 813-814. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 74--78. Trans Tech Publications, Ltd.
CONFERENCE PAPER
Lawrance, G., Paul, P.S., Dhas, D.S.E.J., Benny, D.R., Vignesh, J.H.(2023). Particulate Damping Effects on Tribological Properties During Hard Boring . Lecture Notes in Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 381-390.
Dhas, D.S.E.J., Velmurugan, C., Wins, K.L.D., Senthilkumaran, S., Kandavalli, S.R.(2022). Mathematical Modelling of Machining Performance during Dry Face Milling of AA5052/Tungsten Carbide/Graphite Hybrid Composite . Aip Conference Proceedings. 2446.
George, P., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., George, P., Anuja Beatrice, B.(2021). Machinability, weldability and surface treatment studies of SDSS 2507 material-A review . Materials Today Proceedings. 46. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 7682-7687.
Leo Dev Wins, K., Anuja Beatrice, B., Ebenezer Jacob Dhas, D.S., Anita Sofia, V.S.(2021). Artificial Neural Network and Genetic Algorithm-Based Models for Predicting Cutting Force in Turning of Hardened H13 Steel . Lecture Notes in Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 627-635.
Ramani, S., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., Anuja Beatrice, B.(2021). Influence of B4C and TiB2nanoparticles in tungsten inert gas weldment: The development of nanocomposite filler re-melt behaviour for joint strength enhancement . Materials Today Proceedings. 47. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 6783-6788.
George, P., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., George, P., Anuja Beatrice, B., George, P., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., George, P., Anuja Beatrice, B.(2021). Effect of machining parameters on cutting force during dry milling of 2205 DSS and 2507 SDSS materials . Materials Today Proceedings. 47. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 6614-6617.
BOOK CHAPTER
K. Leo Dev Wins and B. Anuja Beatrice and D. S. Ebenezer Jacob Dhas and V. S. Anita Sofia(2021). Artificial Neural Network and Genetic Algorithm-Based Models for Predicting Cutting Force in Turning of Hardened H13 Steel . Lecture Notes in Mechanical Engineering. Microsoft.AspNetCore.Mvc.Localization.LocalizedHtmlString 627--635. Springer Singapore
評価とコメント
受注プロジェクト総数:
コメント: